10x10 ft. DEA-MiniCage™ is a DEA Approved Drug Storage Cage w/ Swinging Door
Our 10 x 10 x 10.5 DEA-MiniCage™ features a single, self closing door with key lock, panels, posts and shipping / freight to your facility.
- Custom upgrades and options are available including doors, access control locks, and special colors / finishes
Call today for special pricing, custom design & build or built to your plans and specifications.
Availability: In stock
10x10 DEA MinCage is a Four-Wall Cage with Single Hinged Swing Door and Key Lock designed, built and installed to DEA Specs for Physical Security and Access Control
10' H x 10' W x 10.5 ' H with Ceiling Panel
-
Partition Panels
Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1 1/4" x 1 1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.
-
Hinged Doors
Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly. Doors are self-closing and self-locking. - Posts
- Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.
-
Hardware
Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.
-
Finish
Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment. Special / custom finishes available including powder coated & custom colors.
DEA Approved MiniCage is 10' H x 10' W x 10.5' H. Drug Storage Cage for Schedule III, IV, V
Per 21 CFR 1301.72, this four wall drug storage cage, know as our DEA MiniCage is designed and built for storage areas of Schedule III, Schedule IV and Schedule V controlled substances.
- Self closing, self locking Swinging door with Key lock (custom locks or upgrades available).
- Wall and ceiling panels constructed of 10 gauge wire.
- Steel support posts 2" square.
- Posts have welded on base plates for lagging to the floor.
- Posts are set no more than ten feet apart.
- Walls have minimum 1 1/2" horizontal reinforcement at least every 60 inches.
- Standard mesh has 2" x 1" rectangular opening.
- Partition Panels mount flush to floor.
- Heavy 3/8" hardware non-accessible from the exterior.
- Panels stack to any height to work with your facility or floor plan layout.
- Panels & Posts
- Panels
- Adjustable Panels
- Service Windows for access control
- Posts
- Security Doors
- Comes with one (1) swinging hinged Door
- Locks
- Standard Key Lock
- Custom Locks including card reader, biometric, electronic keypad, special electric strikes and more.
- Options & Add-Ons
- Door Closers & Openers
- Special Mesh
- Custom colors, powder coated finishes and more
Details
Our standard 10 x 10 DEA approved drug storage cage with self closing swing door will meet DEA specs for physical security of controlled substance ares for schedule III, IV and Schedule V drugs and substances.
Additional Info
Brand | WireCrafters |
---|