One-Wall Partition, DEA Approved Storage Area

One-Wall Partition, DEA Approved Storage Area

Be the first to review this product

Get pricing on a single (one wall) wall partition to create a DEA Approved drug storage area or secure cage area. Standard or custom height and lengths to meet the unique requirements of your facility. We can help configure a one wall partition for your building today! Contact us for special pricing and consultation.

Availability: In stock

  • Specifications
  • Details
  • Description
  • Additional Info
  • Reviews
  • Tags
    • Partition Panels

      Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1 1/4" x 1 1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.

 

    • Hinged Doors

      Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly. Doors are self-closing and self-locking.

 

    • Sliding Doors

      Sliding shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1 7/8"2 3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly. Doors are self-closing and self-locking.

 

    • Posts

      Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.

 

    • Hardware

      Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.

 

  • Finish

    Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment. Special / custom finishes available including powder coated & custom colors.

DEA Approved Cages and Storage Areas can be built to any size or unique requirement

Per 21 CFR 1301.72, the one-wall access control storage areas for Schedule III through V controlled substances require a high level of security. These installations have the following notable features:

  • Self closing, self locking doors.
  • Standard or custom locking options for access control available
  • Wall and ceiling panels constructed of 10 gauge wire.
  • Steel support posts 2" square.
  • Posts have welded on base plates for lagging to the floor.
  • Posts are set no more than ten feet apart.
  • Walls have minimum 1 1/2" horizontal reinforcement at least every 60 inches.
  • Standard mesh has 2" x 1" rectangular opening.
  • Partition Panels mount flush to floor.
  • Heavy 3/8" hardware non-accessible from the exterior.
  • Panels stack to any height to work with your facility or floor plan layout.
  • Clear spanned ceilings up to 35' across.

Details

Single Wall partition to create a secure storage area for controlled substances. Available in standard or custom height and lengths. DEA approved to meet physical security requirements of storage areas.

Additional Info

Brand No

Write Your Own Review

You're reviewing: One-Wall Partition, DEA Approved Storage Area

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)