Server Cages for Secure Server Rack Storage Enclosures & Colocation Server Controlled Access

Server Cages for Secure Server Rack Storage Enclosures & Colocation Server Controlled Access

Be the first to review this product

Data Center Server Segregation for network server equipment that requires access control is made easy with secure server cages.



  • Lockable, can be integrated into existing HVAC or Halon / Sprinkler Systems

  • Built to any size configuration for your floor plan or server room foot print

  • Segregate and lock specfic equipment for access control & facility security purposes.


Get special prices on full design, build and installation to your specs.

Availability: In stock

  • Specifications
  • Details
  • Description
  • Additional Info
  • Reviews
  • Tags

Data Center Server Segregation | Server Colocation Enclosures

 

Data Center Access Control and Locked Server Equipment and Network Equipment

    • Panels

      Shall be 10 gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1 1/4" x 1 1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.

 

    • Hinged Doors

      Shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.

 

    • Sliding Doors

      Shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1 7/8" x 2 3/8"door track, pad lock lugs (cylinder lock optional), and door keeper assembly.

 

    • Posts

      Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.

 

    • Hardware

      Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.

 

  • Finish

    Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment. Optional powder coat & custom colors available.
  • Twenty standard sized server cage panels 4'-0" or 5'-0" high, by 1'-0" to 10'-0" wide.
  • Stack two or more cage panels between posts to reach wall height.
  • Standard size panels work in ceilings and walls.
  • Custom size panels and special heights available.
  • Hinged, double hinged, sliding, and vertical rise doors available.
  • Sliding doors have patented tamper resistant latch mechanism.
  • Angle frame design gives installer clear access to hardware, speeding installation.
  • Assembly hardware is inaccessible from the secured side of the partition.
  • Standard 3/8" mounting hardware is the heaviest in the industry.
  • Heavy duty options available.
  • Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan.

Details

Protect servers in data centers, colation facility and server hosting facilities with secure server cages and rack enclosures.

Additional Info

Brand No

Write Your Own Review

You're reviewing: Server Cages for Secure Server Rack Storage Enclosures & Colocation Server Controlled Access

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)