Tool Cribs & Locking Equipment Cages, Wire Partition Walls / Cages

Tool Cribs & Locking Equipment Cages, Wire Partition Walls / Cages

Be the first to review this product

Get prices on any size Tool Crib for your facility equipment and tool storage security. Turnkey or custom sizes to provide locked and secure access control to expensive equipment, tools and specialized parts.



  • Optional lockers for storage and organization available.

  • Modular Systems adapt to your facility infrastructure and footprint or floor plan.

  • Special Pricing, shipping and installation available.

  • Specifications
  • Details
  • Product Description
  • Additional Information
  • Reviews
  • Product Tags
    • Panels

      Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1 1/4" x 1 1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.

 

    • Hinged Doors

      Shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.

 

    • Sliding Doors

      Shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1 7/8" x 2 3/8"door track, pad lock lugs (cylinder lock optional), and door keeper assembly.

 

    • Posts

      Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.

 

    • Hardware

      Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.

 

  • Finish

    Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment. including powder coated finishes & custom colors to match your company branding or safety / OSHA color codes.
  • Twenty standard sized tool crib panels 4'-0" or 5'-0" high, by 1'-0" to 10'-0" wide.
  • Stack two or more panels between posts to reach wall height.
  • Standard size panels work in ceilings and walls.
  • Custom size panels and special heights available.
  • Hinged, double hinged, sliding, and vertical rise doors available.
  • Sliding doors have patented tamper resistant latch mechanism.
  • Angle frame design gives installer clear access to hardware, speeding installation.
  • Assembly hardware is inaccessible from the secured side of the partition.
  • Standard 3/8" mounting hardware is the heaviest in the industry.
  • Heavy duty options available.
  • Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan.

Details

Security tool cribs for locking and security of equipment, tools in maintenance or production floor areas.

Additional Information

Brand No

Write Your Own Review

You're reviewing: Tool Cribs & Locking Equipment Cages, Wire Partition Walls / Cages

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)